- 1 Does it matter what chain you put on a bike?
- 2 How do I know my chain size?
- 3 How are bicycle chains size?
- 4 Are 7 and 8 speed chains the same?
- 5 How often should I change my bike chain?
- 6 What kind of lube should I use on my bike chain?
- 7 What is the difference between.325 and 3/8 chain?
- 8 How do I choose a chain sprocket size?
- 9 What is the difference between bicycle chains?
- 10 How many links do I need in my bike chain?
- 11 How do I know what speed my bike is?
- 12 Can I replace a 7 speed freewheel with an 8 speed?
- 13 Is a 7 speed bike good enough?
Does it matter what chain you put on a bike?
The length and number of links doesn’t matter – as all chains are sold too long and you’ll need to remove some links to make it the correct length for your bike.
How do I know my chain size?
To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.
How are bicycle chains size?
Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.
Are 7 and 8 speed chains the same?
Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm. That is why the reverse is not the case and a 7 speed chain and especially a 6 speed one will not work as well on an 8 speed system.
How often should I change my bike chain?
The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4
What kind of lube should I use on my bike chain?
Use a light, waterproof lube such as Boeshield T-9 Waterproof Lubricant. For wet-weather conditions, try Pedro’s Chainj. Never Use: Motor oil—it contains acids and particles of metal that can compromise a chain’s strength and cause it to wear more quickly.
What is the difference between.325 and 3/8 chain?
The three-eighths chain is a beefier saw and better suited to one that has more horsepower. It has larger teeth and a heavier duty chain, so it requires more horsepower to operate correctly. 325-inch chain for those saws between 40 and 60 cc.
How do I choose a chain sprocket size?
Determine the number of teeth of the small sprocket. The number of teeth for the large sprocket is determined by multiplying the number of teeth for the small sprocket by the speed ratio. More than 15 teeth on the small sprocket is recommended. The number of teeth on the large sprocket should be less than 120.
What is the difference between bicycle chains?
Chains can vary in side plate shape, sizing, and height. Differences can cause variations in shifting performance between brands and models. Additionally, chains will vary in the quality of steel used. Better chains that are more durable and longer lasting tend to have harder rivets.
Bicycle drive chain length A new bicycle chain usually comes with 116 links. This is long enough for the biggest chainrings and for most distances of rear wheel from front chainrings. So for optimal length a new chain is usually shortened from the 116 links that come in the box.
How do I know what speed my bike is?
Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike. If you have one front gear and three back gears, you have a 3-speed bike.
Can I replace a 7 speed freewheel with an 8 speed?
You can change to 8 speed, but a normal rear wheel for roadbikes will not fit directly into the frame because it’s 130 mm wide. Depends on the stiffness of the rear frame if it can be pushed together safely to 130 mm.
Is a 7 speed bike good enough?
Every rider has his comfort level while riding, So to summarise, 7- speed is good enough on a bike. So a 7- speed bike provides the right number of speed gears with efficiency to ride on difficult terrains. As long as you are comfortable and happy with the 7- speed bike, the 7-speed will be enough for you.