- 1 How do I know what chain size to get?
- 2 Does it matter what chain you put on a bike?
- 3 What size bike chain do I need single speed?
- 4 What is chain pitch?
- 5 How often should I change my bike chain?
- 6 What kind of lube should I use on my bike chain?
- 7 What is the difference between bicycle chains?
- 8 Can I use an 8 speed chain on a single speed bike?
- 9 How do I know what speed my bike is?
- 10 What is the difference between.325 and 3/8 chain?
- 11 What do numbers mean on chainsaw chain?
How do I know what chain size to get?
After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.
Does it matter what chain you put on a bike?
The length and number of links doesn’t matter – as all chains are sold too long and you’ll need to remove some links to make it the correct length for your bike.
What size bike chain do I need single speed?
1/8″ chains are used exclusively for single speed setups. In addition to the other answers, I found it helpful to read that the nominal width of a chain (1/8 or 3/32) actually refers to the width of the sprocket.
What is chain pitch?
Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two.
How often should I change my bike chain?
The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4
What kind of lube should I use on my bike chain?
Use a light, waterproof lube such as Boeshield T-9 Waterproof Lubricant. For wet-weather conditions, try Pedro’s Chainj. Never Use: Motor oil—it contains acids and particles of metal that can compromise a chain’s strength and cause it to wear more quickly.
What is the difference between bicycle chains?
Chains can vary in side plate shape, sizing, and height. Differences can cause variations in shifting performance between brands and models. Additionally, chains will vary in the quality of steel used. Better chains that are more durable and longer lasting tend to have harder rivets.
Can I use an 8 speed chain on a single speed bike?
Since single speed chain is by far the cheapest, there is no need to experiment with multi speed chains. However, 6 to 8 speed chains can fit some single speed bicycles – depending on the chainring width.
How do I know what speed my bike is?
Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike. If you have one front gear and three back gears, you have a 3-speed bike.
What is the difference between.325 and 3/8 chain?
The three-eighths chain is a beefier saw and better suited to one that has more horsepower. It has larger teeth and a heavier duty chain, so it requires more horsepower to operate correctly. 325-inch chain for those saws between 40 and 60 cc.
What do numbers mean on chainsaw chain?
The numbers stamped on a chainsaw chain are an ID code used by the manufacturer to indicate the pitch and gauge measurements of the chain. Pitch and gauge are important dimensions which influence whether or not a chain is compatible with a chainsaw.