FAQ: How To Remove A Sram Bicycle Chains?

Do bike chains have a direction?

Chain Routing Some chains are directional and any logos or printed letters should face out towards the mechanic on the drive side. The process for routing the chain is the same for either master link or connecting rivet chains, just make sure to lead with outer plates if using a connecting rivet chain.

When should I replace my SRAM 12 speed chain?

Anything at or beyond the 0.75 percent reading means that you should change your chain immediately. If you are using a chain designed for ten or fewer gears, replace your chain as it nears the 0.75 percent mark. If you are using an eleven or twelve speed chain, replace your chain once it has reached 0.5 percent wear.

Can you reuse SRAM PowerLock?

SRAM’s 10 and 11-speed master links are called PowerLocks and are not to be reused. According to SRAM, the ridge that joins the two plates of the PowerLock together can be damaged when unlocking it, increasing the risk of failure if reused.

How do you break a chain without a bolt cutter?

If you don’t have bolt cutters or you have a hardened metal chain that bolt cutters won’t cut through, you can use a saw instead. There are a wide variety of saws that will effectively cut through a chain. Pick a saw to use.

  1. Hacksaw.
  2. Metal grinder, such as an angle grinder.
  3. Reciprocating saw.
  4. Coping saw.

Leave a Reply

Your email address will not be published. Required fields are marked *