FAQ: How To Remove And Replace Bicycle Cassette?

Is it easy to change cassette on bike?

If you’re experiencing skipping while pedaling, especially with a new chain, then it’s also likely time to replace your cassette. With the right tools in hand, replacing a cassette is a straightforward and easy task.

Can I just change my cassette?

Replacing your cassette is a relatively straightforward job that takes minutes, but you do need a couple of specialist tools: a chain whip and a lockring tool, sometimes called a cassette tool (make sure you get the right standard for the type of cassette you have).

What tools do I need to remove a bike cassette?

The lockring is designed to hold the cogs of the cassette in place on the hub. In order to remove and replace your cassette, you need to unscrew this lockring. You’ll need three tools to do this: a chain whip, a cassette lockring remover and a large adjustable crescent wrench.

How much does it cost to replace a cassette on a bike?

It cost anything between $20 and $150 to replace a bike cassette, depending on size and brand. There are a few high-end cassettes, nonetheless, that cost as much as $300 or more. Note that you’ll need to factor in the labor cost and the chain cost (if it’s worn out), each averaging $20.

You might be interested:  Often asked: Where Do I Purchase A Bicycle Chain For A 10 Speed Bike?

How many miles should a bike cassette last?

Very Roughly: bike cassette can last between 4000 to 6000 miles, and some can last up to 10,000 miles, an equivalent of 3 to 4 chains, it depends on the quality of the cassette itself, maintenance, and riding conditions.

How do I know what kind of cassette to get for my bike?

To determine if a sprocket is a freewheel or cassette system, remove the rear wheel from the bike. Find the tool fitting on the sprocket set. Spin the sprockets backwards. If the fittings spin with the cogs, it is a cassette system with a freehub.

Can you put any cassette on a bike?

In some cases, it is possible to run a cassette from a different brand than the rest of your drivetrain. SRAM and Shimano cassettes, on either road or mountain bike, are interchangeable with each other as the spacing is the same between the sprockets.

Do I need to replace cassette with chain?

Once the chain wear is approaching 1% “stretch”, it’s usually time to replace the cassette as well. Because the teeth on the cassette will have worn down to more or less match the chain wear, if a new chain is fitted to a worn cassette, it won’t mesh properly and may jump or skip, especially when changing gear.

How often should I change my chain and cassette?

To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same.

You might be interested:  Quick Answer: How To Remove The Rear Axle On A Bicycle?

Can I put a new chain on an old cassette?

If we try to put a new chain on a worn out cassette, the teeth on the old cassette will match the old worn out chain and won’t properly hold the new chain. We recommend replacing the cassette for every 2 chains so we can guarantee shifting performance from our tune.

Leave a Reply

Your email address will not be published. Required fields are marked *