FAQ: How To Remove The Gear Sprocket Off Of Bicycle?

How do you replace a bicycle sprocket?

How to change a cassette

  1. Remove rear wheel and quick release. Shift into the smallest sprocket.
  2. Remove cassette. Wrap your chain whip around the sprockets, and insert the lockring tool.
  3. Clean freehub body.
  4. Attach new cassette.
  5. Attach lockring.
  6. Reattach quick release and fit wheel back onto bike.

How do I take the pedal crank off my bike?

Use a 15mm wrench to loosen the left pedal from the bike. Then, hold the left pedal and rotate the crank arm to completely detach it from the bike. Both pedals should now be completely removed. If you’re standing on the right, or drive side, of the bike, rotate the crank arm clockwise.

What tools do I need to remove a bike cassette?

The lockring is designed to hold the cogs of the cassette in place on the hub. In order to remove and replace your cassette, you need to unscrew this lockring. You’ll need three tools to do this: a chain whip, a cassette lockring remover and a large adjustable crescent wrench.

How do you remove a sprocket?

Wrap the chain whip tool around the largest sprocket and secure it. The chain whip tool holds the cassette in place so that you can loosen the lockring. Place the sprocket removal tool around the lockring. Use a crescent wrench to turn the lockring counter-clockwise, so that you can loosen and remove it.

Leave a Reply

Your email address will not be published. Required fields are marked *