If you have a standard chain with no master link: Seat the chain in the chain tool, with the pin of the chain tool aligned with a pin in the chain. Turn the handle of the chain tool until you push the pin out far enough that you can break the chain.
How often should I change my bike chain?
The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4
How do I know my bike chain size?
Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.
What tools do you need to change a bike tire?
- Repair stand (optional, makes the work a lot easier)
- Tire levers such as the TL-1.2, TL-4.2, TL-5, TL-6.2, or a multi-tool that incorporates a tire lever.
- Patch Kit such as the GP-2 or VP-1.
- Air pump: either a floor or hand pump.
- Wrench for non-quick-release type wheels that use outer axle nuts.
How do you change a rear bike wheel without a quick-release?
Disengage brakes and derailleur gear (gives chain more slack, making wheel removal easier) Work on the nuts and loosen them using a spanner (Pro tip: use a spanner with the exact size of nuts) Gently remove the rear bike wheel. Completely remove the derailleur chain and lift your bike off the ground.