# FAQ: What Is Chain Pitch -bicycle -bike -chainsaw?

## How is chain pitch measured?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.

## What is a 40 pitch chain?

#40 roller chain is a 1/2″ pitch ANSI B29. 1 industrial duty roller chain that is manufactured with precision components and high-strength carbon steel alloys. #40 roller chain is one of the most common chain sizes used around the world today because of its versatility and productive nature.

## What pitch is 50 chain?

50 Roller chain made to ANSI b 29.1 is 5/8″ or 15.875 mm pitch. It is available in single strand 50-1 duplex 50-2 and triplex 50-3. It is possible to have the chain up to 6 strands wide.

## How do I know if my roller chain is worn?

How To Measure Chain Stretch

1. Identify chain pitch size.
2. Locate the corresponding step on the gauge.
3. Check gauge for fit between any two roller links. (Do this with chain in tension.)
4. If the gauge step fits through the checkpoint, the chain is worn out and needs to be replaced.
You might be interested:  Question: How To Remove Bolt From Bicycle Rear Axl?

## Which is bigger 35 or 40 chain?

The main difference between the 35 and the 40 chain is that one is rollerless and the other has rollers. The two chains also have different pitches and diameters, which will limit their interoperability. Additionally, the 40 chain is rated for a significantly higher tensile strength and working load than the 35.

## How do I know my chain link size?

1. Pitch is measured by finding the distance from the center of one pin to the center of the next pin in line.
2. Determine your side plate height and thickness by measuring both inside and outside the roller chain to ensure that you’re seeing a good average size.

## What does a 520 chain mean?

* Motorcycle chains are what transfer power to the rear wheel. * Performing a 520 conversion is a way to use a lighter chain on a bike equipped with a heavier stock chain. * The lighter chain reduces bike weight and allows for more efficient power generation by the motor.

## What is the pitch of 60 chain?

60 Roller chain made to ANSI b 29.1 is 3/4″ or 19.05 mm pitch and is available in single strand 60-1 duplex 60-2 and triplex 60-3. It is possible to have the chain up to 6 strands wide.

## What chain size should I get?

After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.

You might be interested:  How To Clean Bicycle Chain And Sprocket?

## What is a 35 roller chain?

#35 roller chain is the 2nd size in the ANSI B29. 1 roller chain sizes lineup. It utilizes a small form-factor for tight applications and is manufactured out of high-strength mild carbon steel for shock load and fatigue resistance.

## How long is 120 Link 35 chain?

Go Kart #35 Silver Pro EK 120 Link Chain 45 inches.

## Will a 40 chain fit a 35 sprocket?

No. A #40 chain is 1/2″ between the pins and 5/16″ inside width. A #35 is 3/8″ between the pins and 3/16″ inside width. There is no way it will work.