- 1 How do I know my bike chain size?
- 2 What size is a 9 speed chain?
- 3 How do I know my chain size?
- 4 What is the difference between bicycle chains?
- 5 What is the most common bike chain size?
- 6 Are 9 and 10 speed chains the same?
- 7 How do I know my roller chain size?
- 8 What is the difference between.325 and 3/8 chain?
- 9 How many links do I need in my bike chain?
- 10 How can I tell if my bike chain is stretched?
- 11 What is chain stay?
How do I know my bike chain size?
Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. For example, you’d add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm.
What size is a 9 speed chain?
9 speeds. Chain width is about 6.7 mm. In a pinch, a 10 speed chain can be used. Still, narrower chain is more expensive, doesn’t last as long and will cause a bit slower shifting… but it will work.
How do I know my chain size?
To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.
What is the difference between bicycle chains?
Chains can vary in side plate shape, sizing, and height. Differences can cause variations in shifting performance between brands and models. Additionally, chains will vary in the quality of steel used. Better chains that are more durable and longer lasting tend to have harder rivets.
What is the most common bike chain size?
Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.
Are 9 and 10 speed chains the same?
The internal/roller width of 9 and 10- speed chains is the same – 2.18mm. The only difference is the spacing of the chainrings. 9 and 10-speed chainrings aren’t spaced the same way, but the differences aren’t humongous.
How do I know my roller chain size?
Roller Chain Identification Most roller chain has the size stamped right into the side plates. You may see something like “40”, “C2080H” or “10B” stamped in, which the industry number that represents the chain size. Old chains will most likely need to be cleaned in order to see the size.
What is the difference between.325 and 3/8 chain?
The three-eighths chain is a beefier saw and better suited to one that has more horsepower. It has larger teeth and a heavier duty chain, so it requires more horsepower to operate correctly. 325-inch chain for those saws between 40 and 60 cc.
Bicycle drive chain length A new bicycle chain usually comes with 116 links. This is long enough for the biggest chainrings and for most distances of rear wheel from front chainrings. So for optimal length a new chain is usually shortened from the 116 links that come in the box.
How can I tell if my bike chain is stretched?
Another ballpark method for checking chain wear is by measuring it with a ruler. Pick a rivet and line it up at the zero mark. Count 24 more rivets and your last rivet should be at the 12″ mark of your ruler. If it is off by more than 1/16″ your chain is stretched to the point of replacement.
What is chain stay?
the chain stay is the part of the frame thats nearest to your chain, and often gets big gashes in it from your chain hitting it. often people have something covering there chainstay to protect it from the chain hitting it.