Do all bike chains have a master link? Nope, not all chains have master links. If your bicycle has derailleurs, it means it’s unlikely that your bike’s chain will have a master link.
How do you take off a bike chain without the tool?
If your chain has a master link, remove the link by twisting it off with a pair of needle nose pliers. Press the nubs through to the other side to fully remove the link. You may need to use a hammer or wrench to tap the link so that it pops out allowing the chain to separate.
Do bike chains come apart?
Your bike chain will have outer plates, inner plates, rollers, and pins. You’ll use your chain tool to push the pin out of the rollers, which makes the chain come apart.
If you have a standard chain with no master link: Seat the chain in the chain tool, with the pin of the chain tool aligned with a pin in the chain. Turn the handle of the chain tool until you push the pin out far enough that you can break the chain.
How often should I change my bike chain?
The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4
How do I know my bike chain size?
Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.
A master link or quick-release link is a roller chain accessory that allows convenient connection and disconnection of a chain without the need for a chain tool. It acts as a set of the chain’s outer plates, so joining two sets of the chain’s inner plate ends. Such master links may or may not be re-usable.