How To Remove A Bicycle Cable Lock?

How do you open a bike cable lock without a key?

How to Unlock a Bike Lock Without a Key

  1. Using a Pen. One of the easiest ways to open a bike lock without a key is to use a pen.
  2. Using a Shim. Another method you can try using, if the pen method doesn’t work, is to make a little shim and try that.
  3. Pick the Lock.
  4. Cutting it Off.
  5. Using a Locksmith.
  6. Conclusion.

What do you do when your bike lock gets stuck?

Breathing into the lock can be enough to melt any ice in there, or if it is possible, take the lock inside and allow it to warm up. This should then have solved your problem and you should be able to fully insert and twist the key to unlock your bike!

How do I get a replacement bike lock key?

You can order new bike lock keys from your local specialist retailer. Much like Kryptonite Keys, when you purchased your lock you should have received a security card which has a code on it that enables new keys to be cut.

How do you break a bike lock with a hammer?

Hammer until the U-lock breaks. Keep hammering against the keyhole area of the U-lock. You may have to hammer for 30 seconds or so until a piece breaks off of the bar, after which breaking it will become much easier. Focus your hammering against the broken area of the lock.

You might be interested:  Often asked: How To Remove Cassette From G T Bicycle Wheel?

Why won’t My Kryptonite lock won’t open?

If the lock does not open, try spraying some lubrication, such as Finish Line, where the shackle enters the lock body. Let the lubrication sit for a couple of minutes. Then tap the lock body near the end if needed. If this does not help, submit a request to customer service for further assistance.

How do you reset a Titanker bike lock?

Here are the instructions for you to reset the combination:

  1. Set the right combination aligned with two bumps to open the lock.
  2. Rotate the “SET” knob 90 degrees right.
  3. Turn the dials to set your own combination.
  4. Rotate the “SET” knob 90 degrees left to the original position.
  5. Congratulations!

What do you do when your lock won’t open?

You can spray a little dry lubricant in the lock to free up the plug so you can open the door. Spray lubricant in the keyway and insert the key a few times so the lubricant can get worked into the mechanism. If a dry lubricant doesn’t do the trick, you can try WD-40.

How do you unlock a Kryptonite bike lock without a key?

If you want to learn how to unlock a kryptonite bike lock, the pen trick can do the job for you. It involves using a plastic pen to bypass the lock. All you have to do is remove the tip of the pen and press the cylinder into the keyway and then do a slight turn. This will open the lock if done correctly.

How do you unlock a 4 Number lock?

How to Open a Four Number Combination Lock

  1. Find your combination.
  2. Go to the first number.
  3. Set the second dial on the lock to the second number in the combination.
  4. Use the third wheel to find the third number in the combination.
  5. Locate the fourth number in the combination on the bottom wheel on the lock and center it.

Leave a Reply

Your email address will not be published. Required fields are marked *