How To Remove Bicycle Free Wheel?

How do you change a free bike wheel?

Freewheel Removal

  1. Mount bike in repair stand and remove rear wheel from bike.
  2. Remove quick-release skewer.
  3. Inspect freewheel center and select correct removal tool (see chart above).
  4. Engage tool into splines/notches.
  5. Reinstall quick-release skewer with skewer nut on outside of remover.
  6. Snug skewer nut against remover.

How do I remove a freehub body?

The axle is independent of the freehub.

  1. Remove set screw from side of drive side locknut.
  2. Hold non-drive side cone with cone wrench. Loosen and remove drive side locknut.
  3. Pull freehub to remove. Use care not to loose small parts. Note orientation of pawls as you remove freehub.

How do you loosen cogs?

To remove the cassette, hold it from spinning using a chain whip. Insert the lockring tool (use the FR-5 series), and turn the tool counter-clockwise. The locking ring will unthread from the freehub and the cassette will lift upward. To install the cassette, lubricate the threads inside the cassette stack.

What is a bicycle freewheel?

A freehub is a type of bicycle hub that incorporates a ratcheting mechanism. A freewheel mechanism allows a rider to stop pedalling whilst the cycle is still in forward motion. On a cycle without a freewheel mechanism, the rider has to keep pedalling whenever the cycle is moving.

What tools do I need to remove a bike cassette?

The lockring is designed to hold the cogs of the cassette in place on the hub. In order to remove and replace your cassette, you need to unscrew this lockring. You’ll need three tools to do this: a chain whip, a cassette lockring remover and a large adjustable crescent wrench.

Leave a Reply

Your email address will not be published. Required fields are marked *