How To Remove Old Bicycle Pedals?

How do you remove a stubborn bike pedal?

Use a pedal wrench or hex key to unscrew the pedals from the crank arms. Right pedals loosen by turning counter-clockwise, left pedals loosen clockwise. Apply bike grease to the new pedals and screw them in at an even 90 degree angle. Right pedals tighten by turning clockwise, left pedals tighten counter-clockwise.

How do you remove bike pedals without tools?

How To Remove Bike Pedals Without Pedal Wrench

  1. Step 1: Position the bike accordingly.
  2. Step 2: Insert the spanner where it is to belong.
  3. Step 3: Rotate the spanner in the anti-clockwise direction.
  4. Step 4: Free the Pedal.
  5. Step 5: Turn the bicycle around.
  6. Step 6: Rotate the crank arm.
  7. Step 7: Position the spanner accordingly.

How do you remove look pedals?

Removing Pedals with a Pedal Wrench Place your pedal wrench in position. The right pedal is removed counter-clockwise, so move your pedal forward while pulling the wrench back. For the left pedal, it is removed clockwise, opposite from the right.

What size wrench do I need to change bike pedals?

Pedal wrench flats are typically 15mm in size. 9/16″ (~14.3mm) is somewhat common on older pedals. 17mm and other sizes have been used, but you aren’t very likely to encounter them.

What can I use instead of a pedal wrench?

But if your pedals aren’t super stuck right now, a cone wrench would work fine for your trip and would be way smaller and lighter than a proper pedal wrench.

Leave a Reply

Your email address will not be published. Required fields are marked *