How To Remove On Guard U Bicycle Lock?

How do I unlock onguard bike lock without key?

Minors and children should not attempt these steps without adult supervision.

  1. Use a Locksmith.
  2. Contact a Local Bike Shop.
  3. Use a Lock Pick.
  4. Use a Plastic Pen (BIC/Biro Style Pen)
  5. Use a Shim to open the lock without keys.
  6. Cut the Lock off Yourself.

Can you reset OnGuard bike lock?

Open the lock by aligning the preset combination number to the guide point and pull out the lock post. Turn the reset collar clockwise until it comes to a stop. Select your new combination by rotating the dials (for example: 1234). Be sure to write it down and keep it in a safe place.

How do you break a bike lock without a tool?

In order to do this, take a Bic pen, or a pen with a similar diameter, remove the tip of the pen, and then press the hollow pen tube into the keyway, press it in, and turn it in the unlocking direction. With a cheaper lock, this will usually be enough to open it.

How do you open a lock without a key?

A small or thin screwdriver will work best on interior doors or doors with privacy handles. Simply push the screwdriver into the hole on the doorknob straight through for as far as you can. Then, turn or twist the screwdriver until the lock opens.

You might be interested:  Readers ask: Bicycle Chain Falls Off When Shifting?

Are onguard locks good?

If you’re looking for great security at the lowest price, go for OnGuard. However, don’t expect the highest build quality or the greatest level of customer service. And if you’re looking for good all round performance and fantastic after sales customer service go for Kryptonite.

How do you fix a seized D lock?

If your key has got stuck in the key hole and you can’t get it out, then the solution is the same as above: plenty of WD-40 in between gently trying to turn the key back and forth. Spraying a load of WD-40 into the hole and then leaving it to do it’s business for 5 or 10 minutes can work wonders.

Why won’t My Kryptonite lock won’t open?

If the lock does not open, try spraying some lubrication, such as Finish Line, where the shackle enters the lock body. Let the lubrication sit for a couple of minutes. Then tap the lock body near the end if needed. If this does not help, submit a request to customer service for further assistance.

What do you do when your lock won’t open?

You can spray a little dry lubricant in the lock to free up the plug so you can open the door. Spray lubricant in the keyway and insert the key a few times so the lubricant can get worked into the mechanism. If a dry lubricant doesn’t do the trick, you can try WD-40.

Leave a Reply

Your email address will not be published. Required fields are marked *