- 1 What is normal bike chain?
- 2 Are 7 and 8 speed chains the same?
- 3 Are 11 and 12 speed chains the same?
- 4 How often should I change my bike chain?
- 5 What is a bicycle chain link?
- 6 How can I tell if my bike chain is stretched?
- 7 How do I know what speed my bike is?
- 8 Is a 7 speed bike good enough?
- 9 Can I replace a 7 speed freewheel with an 8 speed?
- 10 Are KMC chains better than Shimano?
- 11 Will 11 speed chain work with 10 speed?
- 12 Can you use Eagle chain 11 speed?
What is normal bike chain?
All modern bicycle chains are made to the “one-half inch pitch” standard, meaning from rivet to rivet is nominally 0.5 inches. The sprocket teeth are cut for this same one-half inch standard to accept bicycle chains.
Are 7 and 8 speed chains the same?
Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm. That is why the reverse is not the case and a 7 speed chain and especially a 6 speed one will not work as well on an 8 speed system.
Are 11 and 12 speed chains the same?
12-speed chains can operate just fine with 11-speed cassettes. The main exception are Shimano’s new 12-speed HG+ models which are heavily optimized for downshifting and thus come with custom inner plates that don’t mix well with non-Shimano 12-speed components.
How often should I change my bike chain?
The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4
The master link is a single removable link segment of a bicycle chain. You’ll hear people also refer to these as quick links. Also, SRAM’s version of the master link is called a Power Link. It is sold separately as well as typically included when you buy a SRAM chain.
How can I tell if my bike chain is stretched?
Another ballpark method for checking chain wear is by measuring it with a ruler. Pick a rivet and line it up at the zero mark. Count 24 more rivets and your last rivet should be at the 12″ mark of your ruler. If it is off by more than 1/16″ your chain is stretched to the point of replacement.
How do I know what speed my bike is?
Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike. If you have one front gear and three back gears, you have a 3-speed bike.
Is a 7 speed bike good enough?
Every rider has his comfort level while riding, So to summarise, 7- speed is good enough on a bike. So a 7- speed bike provides the right number of speed gears with efficiency to ride on difficult terrains. As long as you are comfortable and happy with the 7- speed bike, the 7-speed will be enough for you.
Can I replace a 7 speed freewheel with an 8 speed?
You can change to 8 speed, but a normal rear wheel for roadbikes will not fit directly into the frame because it’s 130 mm wide. Depends on the stiffness of the rear frame if it can be pushed together safely to 130 mm.
Are KMC chains better than Shimano?
The difference between the Shimano chain and the KMC is marginal; your choice will always come to personal preference. Despite the inconvenience of adjusting the chain, the Shimano runs a lot smoother and will provide you with long-lasting use.
Will 11 speed chain work with 10 speed?
As said above, the inside dimensions of a 10-speed and 11-speed chain are virtually identical, so there’s no problem running an 11-speed chain on 10-speed cogs. What’s narrower is the outside dimension of an 11-speed chain compared to a 10-speed chain.
Can you use Eagle chain 11 speed?
No, Eagle™ chains are not compatible with 11 -speed cassettes, derailleurs or rings.