Often asked: How To Find The Master Link On A Bicycle Chain?

What if my chain doesn’t have a master link?

Using a chain pin: If your chain does not have a master link, use a chain tool to reconnect the chain with the chain pin included with your new chain. If you are repairing an existing chain, always use a new chain pin rather than reusing an existing pin. It’s possible to link a master link without a tool.

How do I know what link my bike chain is?

Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.

What is a chain master link?

A master link or quick-release link is a roller chain accessory that allows convenient connection and disconnection of a chain without the need for a chain tool. It acts as a set of the chain’s outer plates, so joining two sets of the chain’s inner plate ends.

How do you break a chain link without a tool?

In order to shorten the link without a chain tool, you need an alternative tool like a hammer, pliers or thin nail. They will assist you in pushing the pin easily. You can position the chain over a socket, and hit it with a hammer. Then, you can now pass the bolt all throughout the open holes.

You might be interested:  FAQ: What Type Of Cleaner To Use On Bicycle Chain?

Is my bike chain too short?

If the chain is too short, this shift is difficult to make and the derailleur cage is stretched out and almost parallel to the chainstay. If the chain is really short, then you might not even be able to shift into the largest cog. Before you remove the chain, make sure it’s on the small chainring and smallest cog.

How do I know my chain size?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.

What is a bicycle chain link?

The master link is a single removable link segment of a bicycle chain. You’ll hear people also refer to these as quick links. Also, SRAM’s version of the master link is called a Power Link. It is sold separately as well as typically included when you buy a SRAM chain.

Leave a Reply

Your email address will not be published. Required fields are marked *