Often asked: How To Remove Bicycle Pedals Trek You Tube?

How do you remove Bontrager pedals?

Thread both pedals into the crankarms as far as you can by hand. There are 3 “secrets” to easy pedal removal:

  1. Turn the wrench the right way (to loosen the right and left pedal, the wrench is turned towards the back of the bike).
  2. Position the wrench alongside the crankarm for optimum leverage.

What size wrench do I need to change bike pedals?

Pedal wrench flats are typically 15mm in size. 9/16″ (~14.3mm) is somewhat common on older pedals. 17mm and other sizes have been used, but you aren’t very likely to encounter them.

Can you remove pedals from bike?

Use a pedal wrench or hex key to unscrew the pedals from the crank arms. Right pedals loosen by turning counter-clockwise, left pedals loosen clockwise. Apply bike grease to the new pedals and screw them in at an even 90 degree angle. Right pedals tighten by turning clockwise, left pedals tighten counter-clockwise.

How tight should pedals be?

Always be sure to double check that the pedals are tight. They should be firmly snug but don’t have to be herculean tight. Losing a pedal is a recipe for crashing and a loose pedal can damage your crank arm threads beyond repair. Installing pedals is easy when you know what to do.

How do I remove Allen key pedals?

Fix the Allen Key into position with the crank arm at 6 O’Clock (pointing towards the ground) and the Allen Key at 90degrees to the crank arm, at 3 O’Clock (pointing towards the back of the bike). Hold the pedal still and push in an anti-clockwise direction on the Allen Key until the pedal comes loose.

Leave a Reply

Your email address will not be published. Required fields are marked *