- 1 How do you take spokes off without spoke?
- 2 How do you Despoke a wheel?
- 3 Are loose spokes dangerous?
- 4 Can you replace spokes on a bicycle wheel?
- 5 How tight should spokes be?
- 6 How long do spokes last?
- 7 Can I ride with a broken spoke?
- 8 Can I ride with a broken spoke MTB?
- 9 What causes a bike spoke to break?
- 10 How much does it cost to replace spokes on a bike?
How do you take spokes off without spoke?
You can use an unbutchered screwdriver if the spokes do not go all the way through the nipple. If they do, then a screwdriver with a slot cut into it can work. This method works when the spokes are rounded out. But its much better to spend a few bucks on a spoke wrench that fits.
How do you Despoke a wheel?
This is what a ready to despoke wheel looks like. Pull spokes through the holes in the hub.
- If available, put the wheel in a truing stand.
- Find the appropriate spoke wrench.
- Loosen all the spokes with the wrench, and then you can turn the nipples with your fingers, or from the outside of the rim with a screwdriver.
Are loose spokes dangerous?
Never ride with a loose spoke. The friction created will cause the rider to burst into flames and may even cause the Earth to slip off it’s axis.
Can you replace spokes on a bicycle wheel?
Fitting a replacement is easier than you think. Spokes can snap. Not often, and perhaps never if your bike has well-built wheels with enough spokes each to share the load. But even if you’re not very heavy and your wheels have plenty of spokes each to share the load better, they can break.
How tight should spokes be?
The spokes should feel tight and firm. They should have just a little give when you squeeze them fairly hard. Squeeze a few spokes on other bikes to get an idea of how they should feel. It is rare for spokes to be too tight, but it is very common for them to be too loose.
How long do spokes last?
You may break a spoke with these wheels every 5 or 6000 miles, but that’s not because the spokes wear out. And that seems fairly frequent to breaking spokes on average, especially for a rider of your weight. There would have to be something going on with the spoke or wheel to cause it to break.
Can I ride with a broken spoke?
Yes, you can ride with a broken spoke without harming yourself or the bike. The immediate step should be to remove the spoke from the nipple so that it does not damage the other parts of the bike. However, if you have multiple broken spokes, it’s best not to ride the bike.
Can I ride with a broken spoke MTB?
Can you ride a mountain bike with a broken spoke? Yes, you can ride with a broken spoke or even multiple broken spokes, as long as the wheels are still able to roll, but it will leave your ride wobbly and will eventually cause damage to other spokes.
What causes a bike spoke to break?
Bike spokes break most commonly due to wear and tear. A high-frequent cause for spoke breaks is that the rider has hit a curb or pothole, doesn’t maintain the bike well, or the passenger is too heavy for that model. Rougher terrain will also deteriorate the rims faster, which in turn deteriorates the spokes faster.
How much does it cost to replace spokes on a bike?
You can replace unlimited spokes if the wheel is in good condition. It does require experience and special equipment, but for a bike shop it is straightforward. Spokes cost the equivalent of a few dollars each. With labor, it should be about $30-$40 at a good bike shop.