Contents

- 1 How do I know my bike chain size?
- 2 Is 116 link chain enough?
- 3 How long is a 116 link chain?
- 4 What number chain do bicycles use?
- 5 How can I tell if my bike chain is stretched?
- 6 How do I know what speed my bike is?
- 7 Is 114 chain Links enough?
- 8 Does chain length affect shifting?
- 9 How long is a 520 chain link?
- 10 How often should I change my bike chain?
- 11 How strong is a bicycle chain?

## How do I know my bike chain size?

Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.

## Is 116 link chain enough?

A new bicycle chain usually comes with 116 links. This is long enough for the biggest chainrings and for most distances of rear wheel from front chainrings. So for optimal length a new chain is usually shortened from the 116 links that come in the box.

## How long is a 116 link chain?

One link is two pin-to-pin dimensions. Each pin is 1/2″ from its neighbor, so a full link is 1″ long. When they say the chain is 116 links, they are really saying there are 116 pins, for a chain length of 58 inches.

## What number chain do bicycles use?

The chain in use on modern bicycles has a 1⁄2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in “#40” indicates the pitch of the chain in eighths of an inch; and is standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.

## How can I tell if my bike chain is stretched?

Another ballpark method for checking chain wear is by measuring it with a ruler. Pick a rivet and line it up at the zero mark. Count 24 more rivets and your last rivet should be at the 12″ mark of your ruler. If it is off by more than 1/16″ your chain is stretched to the point of replacement.

## How do I know what speed my bike is?

Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike. If you have one front gear and three back gears, you have a 3-speed bike.

## Is 114 chain Links enough?

In most cases it will be long enough. I have used a 114 link chain with 34/50 and 11-40 cassette on 422mm chainstays. setup is 34×50 chain rings. 12-36 cassette.

## Does chain length affect shifting?

Setup: Chain Length. Proper chain length makes a big difference with shifting. It’s not intuitive — that’s for sure — but lots of front shifting problems are solved by setting chain length (and tension) correctly.

## How long is a 520 chain link?

D.I.D 520 Standard Series Chain – 110 Links, Chain Type: 520, Chain Length: 110, Color: Natural, Chain Application: All 520 x 110.

## How often should I change my bike chain?

The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4

## How strong is a bicycle chain?

Wippermann’s internal standard is 9,500-11,000 Newtons of breaking force for its bicycle chains, and they achieved that; some of the others fell short of that.