Often asked: Why Use Bicycle Chain Lube?

Is lube on bike chain important?

A bicycle chain needs lubricant to overcome mechanical resistance, prevent rust and wear, and keep your drivetrain in tip-top condition. If not used properly, the same lubricating compounds designed to protect and enhance drivetrain performance are inherently at odds with the very purpose for which they were created.

What does bike chain lube do?

Bicycle chain lubricant, chain lube or chain oil is an essential item for your bike maintenance. It ensures the hardworking moving parts of your bike chain are able to move smoothly past each other, it helps stop the chain wearing down or rusting, and makes your ride less clunky and more comfortable.

Does bike lube make a difference?

Studies have shown that the type of lube itself makes little difference on the efficiency of a clean chain. The real value of lubrication is to fill the gaps that would otherwise be filled by dirt and grime — things that do increase friction and decrease efficiency.

How often should I lube my bike chain?

Bicycle Tutor recommends cleaning and lubricating your bike’s drive chain at least once every month to maintain optimal performance and protection. The chain and drivetrain are typically the dirtiest parts of your bike, and this dirt is bad news for bike longevity and performance.

You might be interested:  Readers ask: How To Unhook A Chain Bicycle?

Is it OK to use wd40 on bike chain?

All you need to do is rinse the bike chain to remove any mud and thick dirt. Spray the WD-40 Bike Degreaser onto the surface of your bike chain and give it adequate time to work. On top of that, the WD-40 Bike Degreaser can be used for the cleaning and degreasing of other moving parts as well.

Can you use silicone lube on bike chain?

Yes. It is not optimal for use on chains though. It washes away rather easily leaving your chain unprotected and un-lubricated. It would work in a pinch but a light oil or something specifically made for the application will work much better and last a lot longer.

Can I use engine oil as bicycle chain lube?

Beware. While the usage of bike oil and grease is not advisable as a bike chain lube, they can still work some magic. Motor oil is another alternative to getting an actual bike chain lubricant. The fact of the matter is that it will wear away the components it is used on, owing to its acidity and particulate matter.

Is dry lube good for bike chain?

You can’t just use any lube on your bike chain — your garage or toolbox should have both dry and wet bike chain lubes. You should use a dry, wax-based lube during dry, summer, and spring conditions. They attract less dirt during such conditions, making it easy to ride on gravel or off-road conditions.

Is chain wax better than lube?

If you want to use your motorcycle immediately you lubricate the chain, then you’ ll be better off using chain lube. If you ride your bike in dirty and dusty terrains, then you should consider using a chain wax since it has proven to pretty effective at keeping off elements such as dirt, grime, water, etc.

You might be interested:  Readers ask: What Size Chain For My Bicycle?

Can I use chain lube instead of grease?

Mtb chains can be both lubed or greased (if bought new they usually come greased), I would prefer lubing over greasing for road chains. Spray lubricants should not be used on bicycle chains, you can easily contaminate other parts of bike. Rather apply lube on each chain link carefully.

Can I use Vaseline on my bike chain?

The fluid consists of two components – Vaseline, which proved to be one of the best lubricants, and a special kind of thinner that helps to get the Vaseline deep into the chain links. Once the thinner evaporates, Vaseline will do its best to make your chain running quietly.

Leave a Reply

Your email address will not be published. Required fields are marked *