Question: Bicycle How To Remove Freewheel?

How do I remove a freehub body?

The axle is independent of the freehub.

  1. Remove set screw from side of drive side locknut.
  2. Hold non-drive side cone with cone wrench. Loosen and remove drive side locknut.
  3. Pull freehub to remove. Use care not to loose small parts. Note orientation of pawls as you remove freehub.

What tools do I need to remove a bike cassette?

The lockring is designed to hold the cogs of the cassette in place on the hub. In order to remove and replace your cassette, you need to unscrew this lockring. You’ll need three tools to do this: a chain whip, a cassette lockring remover and a large adjustable crescent wrench.

Can you remove a sprocket?

You’ll need two chain whips to loosen the sprocket. One to keep the cassette in place while you unscrew the sprocket with the other. I used a chain whip from Decathlon to loosen the sprocket.

How do you loosen cogs?

To remove the cassette, hold it from spinning using a chain whip. Insert the lockring tool (use the FR-5 series), and turn the tool counter-clockwise. The locking ring will unthread from the freehub and the cassette will lift upward. To install the cassette, lubricate the threads inside the cassette stack.

Leave a Reply

Your email address will not be published. Required fields are marked *