- 1 Are all 10 speed chains the same?
- 2 How do I know what bike chain I need?
- 3 Can I use any 10 speed chain?
- 4 How do I know if my bike is 10 or 11-speed?
- 5 What size bike chain do I need single speed?
- 6 Are 9 and 10 speed chains compatible?
- 7 Are SRAM chains better than Shimano?
- 8 Can I use 11 speed crankset with 10 speed chain?
- 9 How often should I change my bike chain?
- 10 What is the difference between bicycle chains?
- 11 Are 10 and 11 speed chainrings the same?
- 12 Are KMC chains better than Shimano?
- 13 Are 11 and 12 speed chains the same?
Are all 10 speed chains the same?
Since 10 and 11 speed chains are almost the same width, as well as cassette teeth, 10 speed chain can be used in stead of 11 speed one, without it jamming between the sprockets. However, this will still not work perfectly and will cause premature sprocket wear, so better to avoid it.
How do I know what bike chain I need?
Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.
Can I use any 10 speed chain?
Any Shimano- or SRAM-compatible 10-speed chain can be used with any other Shimano 10-speed groupsets, and with any SRAM 10-speed groupset, regardless of manufacturer statements that their chains will provide optimal performance with their components.
How do I know if my bike is 10 or 11-speed?
Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike.
What size bike chain do I need single speed?
1/8″ chains are used exclusively for single speed setups. In addition to the other answers, I found it helpful to read that the nominal width of a chain (1/8 or 3/32) actually refers to the width of the sprocket.
Are 9 and 10 speed chains compatible?
10-speed chains have the same inner/roller width as 9-speed chains while being narrower. Therefore, a 10-speed chain meets the compatibility requirements because it has enough inner space for a 9-speed sprocket and doesn’t cause rubbing due to its slimmer profile.
Are SRAM chains better than Shimano?
Both Shimano and SRAM can comfortably claim to have improved longevity with their top-tier 12-speed chains versus the equivalent 11-speed options. “Both the X01 and XX1 chains were so far ahead of any other chain from a pure elongation wear measure that I had to re-run the tests. The results were basically identical.
Can I use 11 speed crankset with 10 speed chain?
An 11-speed crank will perform equally well on a 10-speed system. No one has shown that there is any difference in ring spacing. The chains have the same internal width, so don’t know the difference.
How often should I change my bike chain?
The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4
What is the difference between bicycle chains?
Chains can vary in side plate shape, sizing, and height. Differences can cause variations in shifting performance between brands and models. Additionally, chains will vary in the quality of steel used. Better chains that are more durable and longer lasting tend to have harder rivets.
Are 10 and 11 speed chainrings the same?
There’s no meaningful difference between 10 and 11 speed rings. Instead of making the cogs narrower, Shimano thinned down the spacing between the plates of the chain.
Are KMC chains better than Shimano?
The difference between the Shimano chain and the KMC is marginal; your choice will always come to personal preference. Despite the inconvenience of adjusting the chain, the Shimano runs a lot smoother and will provide you with long-lasting use.
Are 11 and 12 speed chains the same?
12-speed chains can operate just fine with 11-speed cassettes. The main exception are Shimano’s new 12-speed HG+ models which are heavily optimized for downshifting and thus come with custom inner plates that don’t mix well with non-Shimano 12-speed components.