Are KMC chains directional?
From KMC: to confirm, Shimano 10 speed road and MTB chains ARE directional. Installing them in the wrong direction will affect shifting performance and gear wear. All KMC chains are non-directional.
Can I replace a bike chain myself?
Insert the pin Find the pointy end of the joining pin that came packaged with your new chain. Take the ends of the chain and slot them together. Facing the bike from the drive side, push the pin into the chain to hold it together. Pick up the chain tool again and unscrew the handle a few turns.
Is it OK to use wd40 on bike chain?
All you need to do is rinse the bike chain to remove any mud and thick dirt. Spray the WD-40 Bike Degreaser onto the surface of your bike chain and give it adequate time to work. On top of that, the WD-40 Bike Degreaser can be used for the cleaning and degreasing of other moving parts as well.
Are KMC chains better than Shimano?
The difference between the Shimano chain and the KMC is marginal; your choice will always come to personal preference. Despite the inconvenience of adjusting the chain, the Shimano runs a lot smoother and will provide you with long-lasting use.
IS KMC MISSING LINK COMPATIBLE WITH SHIMANO CHAIN, SRAM CHAIN, OR CAMPY CHAIN? Yes, KMC constructs Missing Link I, II, 9, and 10 for 7.3mm, 7.1mm, 6.6mm, and 5.9mm respectively; all Missing Links are compatible with Sram, Shimano, and Campy equivalent chains.
How often should I change my bike chain?
The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4
How much does it cost to replace a bike chain?
Most bike shops will charge about $30 – $50 dollars depending on the bike shop, whether it’s a popular brand or a “mom & pop” shop. You may also want to take into consideration that the chain itself may cost $30 – $50 dollars but then the labor cost to replace this might run you an additional $10 dollars.