Quick Answer: How To Choose The Right Chain For A Bicycle?

What size chain do most bicycles use?

The chain in use on modern bicycles has a 1⁄2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in “#40” indicates the pitch of the chain in eighths of an inch; and is standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.

Are 7 and 8 speed chains the same?

Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm. That is why the reverse is not the case and a 7 speed chain and especially a 6 speed one will not work as well on an 8 speed system.

How do I know my chain size?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.

What size is a standard bicycle chain?

All modern bicycle chains are made to the “one-half inch pitch” standard, meaning from rivet to rivet is nominally 0.5 inches. The sprocket teeth are cut for this same one-half inch standard to accept bicycle chains. However, this does not mean all makes and models of chains are interchangeable.

You might be interested:  Quick Answer: How Many Times Can You Push A Rivet On A New Bicycle Chain?

Are KMC chains better than Shimano?

The difference between the Shimano chain and the KMC is marginal; your choice will always come to personal preference. Despite the inconvenience of adjusting the chain, the Shimano runs a lot smoother and will provide you with long-lasting use.

How often should I change my bike chain?

The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4

What is the difference between.325 and 3/8 chain?

The three-eighths chain is a beefier saw and better suited to one that has more horsepower. It has larger teeth and a heavier duty chain, so it requires more horsepower to operate correctly. 325-inch chain for those saws between 40 and 60 cc.

How do I choose a chain sprocket size?

Determine the number of teeth of the small sprocket. The number of teeth for the large sprocket is determined by multiplying the number of teeth for the small sprocket by the speed ratio. More than 15 teeth on the small sprocket is recommended. The number of teeth on the large sprocket should be less than 120.

What is a bicycle chain link?

The master link is a single removable link segment of a bicycle chain. You’ll hear people also refer to these as quick links. Also, SRAM’s version of the master link is called a Power Link. It is sold separately as well as typically included when you buy a SRAM chain.

Leave a Reply

Your email address will not be published. Required fields are marked *