Using a chain pin: If your chain does not have a master link, use a chain tool to reconnect the chain with the chain pin included with your new chain. If you are repairing an existing chain, always use a new chain pin rather than reusing an existing pin. It’s possible to link a master link without a tool.
How often should I change my bike chain?
The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4
A master link or quick-release link is a roller chain accessory that allows convenient connection and disconnection of a chain without the need for a chain tool. It acts as a set of the chain’s outer plates, so joining two sets of the chain’s inner plate ends. Such master links may or may not be re-usable.
Are chain Quick Links reusable?
The quick link is designed for use with 11-speed chains and is, according to Shimano, not reusable. Quick links are dead easy to install. Place the quick link into the chain gap, align and snap together – usually done by applying pressure through the cranks.
Bikes that typically do have chains with master links are BMX bikes and one- or three-speed town bikes with internal gears. You can also identify if your chain should have a master link by measuring the width of the gap between the link plates. If the width is 1/8 inch, your chain should have a master rivet.
But you can easily remove it from a bike without any rear derailleur by being a bit tricky by pulling out the rear wheel. 4. Do all bike chains have a master link? Nope, not all chains have master links.
However, even Shimano is now changing its tune and its latest 11 and 12 speed chains are available with master links.