- 1 How do you measure chain width?
- 2 Are bike chains different widths?
- 3 How do I know what chain to get for my bike?
- 4 What is the width of a 9 speed chain?
- 5 How do I know my roller chain size?
- 6 How do you measure anchor chain size?
- 7 How do I know if my bike is 10 or 11 speed?
- 8 How often should I change my bike chain?
- 9 How many links do I need in my bike chain?
- 10 Are 9 and 10 speed cassettes the same width?
How do you measure chain width?
To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.
Are bike chains different widths?
Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.
How do I know what chain to get for my bike?
When selecting a chain, the first consideration is the number of rear sprockets. The rear cog sets have been made with 5, 6, 7, 8, 9, 10, 11, or 12 sprockets. As the number of cogs on the rear hub increases, the spacing between cogs tends to be reduced.
What is the width of a 9 speed chain?
9 speeds. Chain width is about 6.7 mm. In a pinch, a 10 speed chain can be used. Still, narrower chain is more expensive, doesn’t last as long and will cause a bit slower shifting… but it will work.
How do I know my roller chain size?
Roller Chain Identification Most roller chain has the size stamped right into the side plates. You may see something like “40”, “C2080H” or “10B” stamped in, which the industry number that represents the chain size. Old chains will most likely need to be cleaned in order to see the size.
How do you measure anchor chain size?
So how do you measure your anchor chain size? Anchor chain is measured in two primary ways – thickness of the metal in the link, and the length of the link. The most precise method is to use Vernier calipers, though with care a measuring tape can get a close enough estimate.
How do I know if my bike is 10 or 11 speed?
Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike.
How often should I change my bike chain?
The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4
Bicycle drive chain length A new bicycle chain usually comes with 116 links. This is long enough for the biggest chainrings and for most distances of rear wheel from front chainrings. So for optimal length a new chain is usually shortened from the 116 links that come in the box.
Are 9 and 10 speed cassettes the same width?
Sometimes, the difference lies in the brand For the Shimano brand, their 9-speed cassettes have an extra cog added to the 8-speed cassette, while the overall width remains the same. The same thing goes for the 10-speed where it still has the same width as an 8-speed cassette. This makes the 10-speed slightly narrower.