- 1 How do I know my bike chain size?
- 2 What replacement chain do I need for my bike?
- 3 What size is standard bicycle chain?
- 4 How do I set the size of a chain link?
- 5 How often should I lube my bike chain?
- 6 Why does my bike chain slip when I pedal hard?
- 7 How often should I replace my bike chain?
- 8 How much does it cost to fit a bike chain?
- 9 How much does it cost to replace a bike chain?
How do I know my bike chain size?
Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.
What replacement chain do I need for my bike?
A reading of 0.5 to 0.75 means you should replace your chain. A reading of 0.75 or higher means you not only need to replace your chain, but you should also check the condition of your cassette and chainrings to see if the stretched chain has caused excessive wear to these parts.
What size is standard bicycle chain?
Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.
Chain Link Sizes: How to Measure Chain Link Sizes
- Pitch is measured by finding the distance from the center of one pin to the center of the next pin in line.
- Determine your side plate height and thickness by measuring both inside and outside the roller chain to ensure that you’re seeing a good average size.
How often should I lube my bike chain?
Bicycle Tutor recommends cleaning and lubricating your bike’s drive chain at least once every month to maintain optimal performance and protection. The chain and drivetrain are typically the dirtiest parts of your bike, and this dirt is bad news for bike longevity and performance.
Why does my bike chain slip when I pedal hard?
Most of the time, a skipping chain is caused by cable stretch. In the first half dozen rides on a new bike your shift cables stretch the most. They can also stretch over time as you ride. Hippley explains, “It takes cable tension to open a derailleur, which shifts your chain between gears.
How often should I replace my bike chain?
To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles.
How much does it cost to fit a bike chain?
Most shops charge $15 to $20 to install a chain or you can purchase a chain tool for $10 to $50 and learn to do it yourself.
How much does it cost to replace a bike chain?
Most bike shops will charge about $30 – $50 dollars depending on the bike shop, whether it’s a popular brand or a “mom & pop” shop. You may also want to take into consideration that the chain itself may cost $30 – $50 dollars but then the labor cost to replace this might run you an additional $10 dollars.