- 1 How do I know my bike chain size?
- 2 What replacement chain do I need for my bike?
- 3 How do I know my chain size?
- 4 Will any 9 speed chain fit my bike?
- 5 What size is standard bicycle chain?
- 6 Are all bicycle chains the same size?
- 7 How often should I lube my bike chain?
- 8 How often should I change my bike chain?
- 9 Why does my bike chain slip when I pedal hard?
- 10 What is the difference between.325 and 3/8 chain?
- 11 How do I know my roller chain size?
- 12 Is a 7 speed bike good enough?
- 13 What does 9 speed bike mean?
- 14 Is 8 gears enough on a bike?
How do I know my bike chain size?
Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.
What replacement chain do I need for my bike?
A reading of 0.5 to 0.75 means you should replace your chain. A reading of 0.75 or higher means you not only need to replace your chain, but you should also check the condition of your cassette and chainrings to see if the stretched chain has caused excessive wear to these parts.
How do I know my chain size?
To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.
Will any 9 speed chain fit my bike?
Front chainrings are less sensitive to the thickness of chain used. Otherwise, all the 9 speed chains will work well, regardless of the manufacturer: Campagnolo, SRAM and Shimano.
What size is standard bicycle chain?
Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.
Are all bicycle chains the same size?
Are all bicycle chains the same size? No, all bicycle chains are not the same size. Size varies on the bike’s numbers of sprockets, speeds, the distance between the front chainring and rear cogs, and the number of teeth on them.
How often should I lube my bike chain?
Bicycle Tutor recommends cleaning and lubricating your bike’s drive chain at least once every month to maintain optimal performance and protection. The chain and drivetrain are typically the dirtiest parts of your bike, and this dirt is bad news for bike longevity and performance.
How often should I change my bike chain?
The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4
Why does my bike chain slip when I pedal hard?
Most of the time, a skipping chain is caused by cable stretch. In the first half dozen rides on a new bike your shift cables stretch the most. They can also stretch over time as you ride. Hippley explains, “It takes cable tension to open a derailleur, which shifts your chain between gears.
What is the difference between.325 and 3/8 chain?
The three-eighths chain is a beefier saw and better suited to one that has more horsepower. It has larger teeth and a heavier duty chain, so it requires more horsepower to operate correctly. 325-inch chain for those saws between 40 and 60 cc.
How do I know my roller chain size?
Roller Chain Identification Most roller chain has the size stamped right into the side plates. You may see something like “40”, “C2080H” or “10B” stamped in, which the industry number that represents the chain size. Old chains will most likely need to be cleaned in order to see the size.
Is a 7 speed bike good enough?
Every rider has his comfort level while riding, So to summarise, 7- speed is good enough on a bike. So a 7- speed bike provides the right number of speed gears with efficiency to ride on difficult terrains. As long as you are comfortable and happy with the 7- speed bike, the 7-speed will be enough for you.
What does 9 speed bike mean?
When magazines and websites talk about a bike’s ‘speed’, it’s a reference to the number of sprockets. A bike with three chainrings and nine sprockets is 9-speed, even though it has 27 theoretical ratios. The higher the sprocket count, the more expensive, smoother shifting, and lighter weight the gears.
Is 8 gears enough on a bike?
What on earth does this mean? Means no I don’t believe 8 gears is enough once he gets up to speed and fitness. 50-11 at a top gear is plenty for 95% of riders. For high speeds the number of gears is irrelevant.