Quick Answer: What Number Size Chain Does A Bicycle Use?

What size is a standard bicycle chain?

All modern bicycle chains are made to the “one-half inch pitch” standard, meaning from rivet to rivet is nominally 0.5 inches. The sprocket teeth are cut for this same one-half inch standard to accept bicycle chains. However, this does not mean all makes and models of chains are interchangeable.

How do I know my bike chain size?

Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. For example, you’d add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm.

Are 7 and 8 speed chains the same?

Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm. That is why the reverse is not the case and a 7 speed chain and especially a 6 speed one will not work as well on an 8 speed system.

You might be interested:  Question: How To Remove A Bicycle Freewheel Without The Tool?

Are all bicycle chains the same size?

Are all bicycle chains the same size? No, all bicycle chains are not the same size. Size varies on the bike’s numbers of sprockets, speeds, the distance between the front chainring and rear cogs, and the number of teeth on them.

What is the most common bike chain size?

Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.

How do I know what speed my bike is?

Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike. If you have one front gear and three back gears, you have a 3-speed bike.

How is chain wear measured?

Another ballpark method for checking chain wear is by measuring it with a ruler. Pick a rivet and line it up at the zero mark. Count 24 more rivets and your last rivet should be at the 12″ mark of your ruler. If it is off by more than 1/16″ your chain is stretched to the point of replacement.

Is my bike chain too short?

If the chain is too short, this shift is difficult to make and the derailleur cage is stretched out and almost parallel to the chainstay. If the chain is really short, then you might not even be able to shift into the largest cog. Before you remove the chain, make sure it’s on the small chainring and smallest cog.

You might be interested:  Quick Answer: Huffy Nighthawk 24 Bicycle What Size Chain?

Can I replace a 7 speed freewheel with an 8 speed?

You can change to 8 speed, but a normal rear wheel for roadbikes will not fit directly into the frame because it’s 130 mm wide. Depends on the stiffness of the rear frame if it can be pushed together safely to 130 mm.

Are KMC chains better than Shimano?

The difference between the Shimano chain and the KMC is marginal; your choice will always come to personal preference. Despite the inconvenience of adjusting the chain, the Shimano runs a lot smoother and will provide you with long-lasting use.

Will a 9 speed chain fit 8 speed?

9 speed chain on an 8 speed cassette is just fine; it’s the wider 8 speed which won’t fit the sprocket spacing on a 9 speed cassette.

What is chain stay?

the chain stay is the part of the frame thats nearest to your chain, and often gets big gashes in it from your chain hitting it. often people have something covering there chainstay to protect it from the chain hitting it.

How long is a 520 chain link?

D.I.D 520 Standard Series Chain – 110 Links, Chain Type: 520, Chain Length: 110, Color: Natural, Chain Application: All 520 x 110.

Leave a Reply

Your email address will not be published. Required fields are marked *