Quick Answer: Where Can I Buy Finish Line Ceramic Wet Bicycle Chain Lube?

Is ceramic chain lube good?

Ceramic lubes offer high performance, low friction lubrication while featuring chemical formulas that ensure they aren’t washed away with the first splash through a puddle. Ceramic lube tends to be more expensive but requires fewer applications, less maintenance and offering better performance.

How do you lubricate ceramic chain?

Fully de- grease drive chain thoroughly before lube application. Ensure drive chain area is dry. Shake bottle vigorously and apply a moderate amount of C3 Dry Lube to the inside chain link, whilst spinning pedals in a reverse motion. Ideally apply 3-4 hours before your ride.

What is ceramic chain lube?

Finish Line’s Ceramic Wax lube is an advanced, wax based bicycle chain lubricant that ensures total drivetrain cleanliness without the distance compromise that other wax lubricants require. Ceramic Wax Lube has even been use by one of Finish Line’s WorldTour teams in dry weather races of 120 miles.

Is it OK to use WD40 on bike chain?

All you need to do is rinse the bike chain to remove any mud and thick dirt. Spray the WD-40 Bike Degreaser onto the surface of your bike chain and give it adequate time to work. On top of that, the WD-40 Bike Degreaser can be used for the cleaning and degreasing of other moving parts as well.

You might be interested:  Quick Answer: How To Remove Right Crank Arm From Bicycle?

What is the best lubricant for a bike chain?

Best bike chain lubes – our picks

  • Rock N Roll Gold.
  • Silca Super Secret Chain Lube.
  • Green Oil Wet Lube.
  • Finish Line Wet.
  • CeramicSpeed UFO Ceramic lube.
  • Tru Tension All Weather.
  • Molten Speedwax. Wax chains take a bit of extra work, but are well worth the effort.
  • Squirt chain lube. High-performance, wax-based lube.

How often should I lube my bike chain?

Bicycle Tutor recommends cleaning and lubricating your bike’s drive chain at least once every month to maintain optimal performance and protection. The chain and drivetrain are typically the dirtiest parts of your bike, and this dirt is bad news for bike longevity and performance.

Should I use wet or dry chain lube?

Dry lubes are for the driest conditions and cleanest chains. Wet lubes can be used all year, offer better value and have the greatest longevity. Whether wet or dry, it’s often a question of how much time and effort you want to put in. Either way, make sure you use a lubricant — your chain will thank you for it!

Can I use engine oil as chain lube?

Usage of engine oil or grease is not at all recommended over a proper chain lubricant. Grease wont penetrate into the O rings and X rings as compared to chain lubricant. Whereas engine oil lasts only for a few days which reduces the life of your chain and sprocket.

Can I use engine oil as bicycle chain lube?

Beware. While the usage of bike oil and grease is not advisable as a bike chain lube, they can still work some magic. Motor oil is another alternative to getting an actual bike chain lubricant. The fact of the matter is that it will wear away the components it is used on, owing to its acidity and particulate matter.

You might be interested:  How To Tell If A Bicycle Chain Is Worn?

What can I use instead of chain lube?

However, some of the lubricant options will actually degrade the lubricants. So, aside from brand bike chain lube, the most common options people opt for include olive oil, household greases, and cooking oil. The main reason being they are all easy to access at home.

How do you clean and lube a bike chain?

Step-by-step instructions

  1. Degrease your chain.
  2. If you don’t have a special tool, use a brush to degrease your chain.
  3. Rub down your chain with soapy water and a rinse to clean off excess degreaser.
  4. Choose your lube.
  5. Lube your chain.
  6. Wipe off any excess lube, and you’re ready to ride!

Leave a Reply

Your email address will not be published. Required fields are marked *