Quick Answer: Where To Get A Bicycle Chain Seattle?

How much does it cost to buy a bike chain?

A bike chain costs anywhere from $10 to $90 depending on the brand, quality, and type of bike you’re buying it for. Basic, cheaper bikes that need a simple chain will be closer to $10. Higher quality chains that are durable and made for top notch road bikes will cost $60 to $90.

Do I need a specific chain for my bike?

Because the distances between the sprockets vary on different ‘speed’ cassettes (e.g. the gap will be wider on a 9-speed block than on an 11-speed), you need a chain that fits. A chain for an 11-speed transmission will be narrower than one for a 9-speed, etc.

Are cheap bike chains any good?

A pure cost vs distance analysis points toward SRAM’s cheaper chains being better value in the long run. But just be warned that they’re only better value if you keep a close check on the more rapid chain wear and replace before they cause elongation wear on the cogs.

You might be interested:  Readers ask: How To Remove Grip Shifter Stuck Bicycle?

How often should a bike chain be replaced?

To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. 4

How do I know my bike chain size?

Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.

What is the difference between bicycle chains?

Chains can vary in side plate shape, sizing, and height. Differences can cause variations in shifting performance between brands and models. Additionally, chains will vary in the quality of steel used. Better chains that are more durable and longer lasting tend to have harder rivets.

Can you fit a chain guide to any bike?

It’s very easy to install, you don’t need to remove your cranks and it has spacers to adapt to almost any size bike. Yes still run a chain guide. I run a OneUp chain guide with bash guard.

Which chain is better KMC or Shimano?

Summary. The difference between the Shimano chain and the KMC is marginal; your choice will always come to personal preference. Despite the inconvenience of adjusting the chain, the Shimano runs a lot smoother and will provide you with long-lasting use.

What is the lightest bicycle chain?

With its hollow, high-alloy pins and plates, the super-lightweight KMC X10SL is the lightest 10-speed chain on the market. But its minimal weight isn’t the only thing it has going for it.

You might be interested:  Question: How Do I Size A Bicycle Chain?

Are Zonkie bike chains any good?

Zonkie Bike Chain And regular lubing should give you a good riding experience. Made of special forging steel, the Zonkie is one of the best bike chains out there. Plus, it has a smooth surface polishing and internal oiling that make it suitable for use immediately after the first install.

Are 10 and 11 speed chains the same?

Since 10 and 11 speed chains are almost the same width, as well as cassette teeth, 10 speed chain can be used in stead of 11 speed one, without it jamming between the sprockets. However, this will still not work perfectly and will cause premature sprocket wear, so better to avoid it.

How do I know what speed my bike is?

Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike. If you have one front gear and three back gears, you have a 3-speed bike.

Leave a Reply

Your email address will not be published. Required fields are marked *