- 1 What size chain do most bicycles use?
- 2 Are 7 and 8 speed chains the same?
- 3 Can I use a 10 speed chain on a 8 speed cassette?
- 4 How many miles should I replace my bike chain?
- 5 How do I know what size chain my bike needs?
- 6 How do I know my chain size?
- 7 Can I replace a 7 speed freewheel with an 8 speed?
- 8 Are KMC chains better than Shimano?
- 9 Is a 7 speed bike good enough?
- 10 Can I convert my 8 speed bike to 10 speed?
- 11 What is the difference between 10 and 11 speed chain?
- 12 What does 9-speed bike mean?
- 13 How often should I lube my bike chain?
- 14 How often should I lubricate my mountain bike chain?
What size chain do most bicycles use?
The chain in use on modern bicycles has a 1⁄2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in “#40” indicates the pitch of the chain in eighths of an inch; and is standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.
Are 7 and 8 speed chains the same?
Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm. That is why the reverse is not the case and a 7 speed chain and especially a 6 speed one will not work as well on an 8 speed system.
Can I use a 10 speed chain on a 8 speed cassette?
A 10 speed chain should work on an 8-speed drivetrain. if you want 10 speeds, you will need a 10 speed-specific chain, cassette, derailleur and shifter (and a new cable while you’re at it).
How many miles should I replace my bike chain?
Replacing your chain regularly can prolong the life of your drivetrain. Most mechanics agree that you should replace your chain about every 2,000 to 3,000 miles, depending on your riding style. Many Tour De France riders wear out two or even three chains on their primary bike over the course of the three-week race.
How do I know what size chain my bike needs?
Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.
How do I know my chain size?
To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.
Can I replace a 7 speed freewheel with an 8 speed?
You can change to 8 speed, but a normal rear wheel for roadbikes will not fit directly into the frame because it’s 130 mm wide. Depends on the stiffness of the rear frame if it can be pushed together safely to 130 mm.
Are KMC chains better than Shimano?
The difference between the Shimano chain and the KMC is marginal; your choice will always come to personal preference. Despite the inconvenience of adjusting the chain, the Shimano runs a lot smoother and will provide you with long-lasting use.
Is a 7 speed bike good enough?
Every rider has his comfort level while riding, So to summarise, 7- speed is good enough on a bike. So a 7- speed bike provides the right number of speed gears with efficiency to ride on difficult terrains. As long as you are comfortable and happy with the 7- speed bike, the 7-speed will be enough for you.
Can I convert my 8 speed bike to 10 speed?
Answer: No you don’t need a new hub. However, you will probably need to put a small (~1mm) spacer at the back of the cassette, otherwise you won’t be able to tighten the whole cassette down.
What is the difference between 10 and 11 speed chain?
Chains for 11-speed systems are around 5.4mm wide on the outside, vs. around 5.9mm wide for 10-speed ones, so that’s 0.25mm narrower from the center of the cog tooth to the end of the chain pin on each side.
What does 9-speed bike mean?
When magazines and websites talk about a bike’s ‘speed’, it’s a reference to the number of sprockets. A bike with three chainrings and nine sprockets is 9-speed, even though it has 27 theoretical ratios. The higher the sprocket count, the more expensive, smoother shifting, and lighter weight the gears.
How often should I lube my bike chain?
Bicycle Tutor recommends cleaning and lubricating your bike’s drive chain at least once every month to maintain optimal performance and protection. The chain and drivetrain are typically the dirtiest parts of your bike, and this dirt is bad news for bike longevity and performance.
How often should I lubricate my mountain bike chain?
The recommendation to lube your mountain bike chain “ at least every 100 miles ” is a generic suggestion found in many bicycle owner’s manuals. If you use your bike for leisurely rides in dry, clean conditions, such as a paved bike path, you could rely on this arbitrary marker.