# Readers ask: How To Measure A Child’s Bicycle Chain?

## How do I know my bike chain size?

Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.

## What size is standard bicycle chain?

Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.

## How do I know what speed my bike is?

Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike. If you have one front gear and three back gears, you have a 3-speed bike.

## Are all bike chain links the same size?

No, all bicycle chains are not the same size. Size varies on the bike’s numbers of sprockets, speeds, the distance between the front chainring and rear cogs, and the number of teeth on them.

You might be interested:  Quick Answer: How To Remove Bicycle Handlebars?

## How often should I change my bike chain?

The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4

## What is a bicycle chain link?

The master link is a single removable link segment of a bicycle chain. You’ll hear people also refer to these as quick links. Also, SRAM’s version of the master link is called a Power Link. It is sold separately as well as typically included when you buy a SRAM chain.

## Which gear is 1 on a bike?

Downshifting, or decreasing the resistance, allows for faster and easier pedaling; upshifting, or increasing the resistance requires more effort and builds endurance. On your shift lever, the lowest number, No. 1, represents first gear.

## What gear is best for going uphill on a bike?

When riding uphill or into a headwind, it’s best to use the small or middle front chainring and bigger rear cogs. When riding downhill, it’s best to use the bigger front chainring and a range of the smaller rear cogs.

## Is gear 1 high or low on a bike?

Bikes generally have 1, 3, 18, 21, 24, or 27 speeds. (10- and 15-speeds are obsolete and you don’t see them on new bikes anymore.) Lower numbers are the low gears, and higher numbers are the high gears. First gear is a low gear.