Readers ask: How To Pick A Bicycle Chain?

Does it matter what chain you put on a bike?

The length and number of links doesn’t matter – as all chains are sold too long and you’ll need to remove some links to make it the correct length for your bike.

What size chain do most bicycles use?

The chain in use on modern bicycles has a 1⁄2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in “#40” indicates the pitch of the chain in eighths of an inch; and is standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.

What does 11 speed chain mean?

Chains for 11-speed systems are around 5.4mm wide on the outside, vs. around 5.9mm wide for 10-speed ones, so that’s 0.25mm narrower from the center of the cog tooth to the end of the chain pin on each side.

Are KMC chains better than Shimano?

The difference between the Shimano chain and the KMC is marginal; your choice will always come to personal preference. Despite the inconvenience of adjusting the chain, the Shimano runs a lot smoother and will provide you with long-lasting use.

You might be interested:  FAQ: How To Remove Front Bicycle Tire?

How often should I change my bike chain?

The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4

What kind of lube should I use on my bike chain?

Use a light, waterproof lube such as Boeshield T-9 Waterproof Lubricant. For wet-weather conditions, try Pedro’s Chainj. Never Use: Motor oil—it contains acids and particles of metal that can compromise a chain’s strength and cause it to wear more quickly.

How do I know my chain size?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.

What size is a standard bicycle chain?

All modern bicycle chains are made to the “one-half inch pitch” standard, meaning from rivet to rivet is nominally 0.5 inches. The sprocket teeth are cut for this same one-half inch standard to accept bicycle chains. However, this does not mean all makes and models of chains are interchangeable.

How do I know if my bike is 10 or 11 speed?

Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike.

You might be interested:  Quick Answer: How To Remove Bicycle Brake Handle?

Is a 7 speed bike good enough?

Every rider has his comfort level while riding, So to summarise, 7- speed is good enough on a bike. So a 7- speed bike provides the right number of speed gears with efficiency to ride on difficult terrains. As long as you are comfortable and happy with the 7- speed bike, the 7-speed will be enough for you.

Can I use 11 speed crankset with 10 speed chain?

An 11-speed crank will perform equally well on a 10-speed system. No one has shown that there is any difference in ring spacing. The chains have the same internal width, so don’t know the difference.

Are expensive bike chains worth it?

No. The only advantage of expensive chains within a specific brand is the minor reduction in weight. The ones with extra plating do look nicer and provide some corrosion resistance, but it takes almost no effort to keep your chain rust free.

What is the lightest bike chain?

Registered. The KMC X-10SL is the lightest chain I know of, but maybe there is something exotic out there that is lighter. The titanium chain mentioned above is claimed at 229gr for 108 links, the X-10SL is 240gr for 116 links.

Leave a Reply

Your email address will not be published. Required fields are marked *