Readers ask: How To Remove A Sprocket From A Bicycle Wheel?

How do I remove a freehub body?

The axle is independent of the freehub.

  1. Remove set screw from side of drive side locknut.
  2. Hold non-drive side cone with cone wrench. Loosen and remove drive side locknut.
  3. Pull freehub to remove. Use care not to loose small parts. Note orientation of pawls as you remove freehub.

How do I take the pedal crank off my bike?

Use a 15mm wrench to loosen the left pedal from the bike. Then, hold the left pedal and rotate the crank arm to completely detach it from the bike. Both pedals should now be completely removed. If you’re standing on the right, or drive side, of the bike, rotate the crank arm clockwise.

What tools do I need to remove a bike cassette?

The lockring is designed to hold the cogs of the cassette in place on the hub. In order to remove and replace your cassette, you need to unscrew this lockring. You’ll need three tools to do this: a chain whip, a cassette lockring remover and a large adjustable crescent wrench.

Leave a Reply

Your email address will not be published. Required fields are marked *