Readers ask: How To Remove Bicycle Freewheel Without Tool?

How do I remove a freehub body?

The axle is independent of the freehub.

  1. Remove set screw from side of drive side locknut.
  2. Hold non-drive side cone with cone wrench. Loosen and remove drive side locknut.
  3. Pull freehub to remove. Use care not to loose small parts. Note orientation of pawls as you remove freehub.

What tools do I need to remove a bike cassette?

The lockring is designed to hold the cogs of the cassette in place on the hub. In order to remove and replace your cassette, you need to unscrew this lockring. You’ll need three tools to do this: a chain whip, a cassette lockring remover and a large adjustable crescent wrench.

Why will my bike not pedal?

But possible reasons are: Your freewheel is broken (it’s in the hub or in the block of gears, depending on type of bike). You have no chain (that would be pretty obvious) You have a hub gear and the indexing is off.

Can you take apart a freewheel?

Disassembly. Leave the freewheel in place on the wheel, or screw it onto a wheel, so that you will have something to hold it with. Breaking the freewheel loose from the wheel now with a freewheel remover reduces the likelihood of damage to the inner body if you have to remove it for reassembly.

Leave a Reply

Your email address will not be published. Required fields are marked *