Readers ask: How To Reset A Master Lock Bicycle Chain?

How do you reset a master lock if you forgot the combination?

Resettable combination locks have a combination that is assigned by the owner of the lock. Therefore, Master Lock does not have record of the combination that the owner set. The lock cannot be reset unless it is in the open position. If your lock is attached to something, you will need to call a locksmith for removal.

How do you fix a master lock without the combination?

Please follow the steps outlined below:

  1. Turn the dial 3 times to the right and stop on the first number of the sequence.
  2. Turn the dial to the left, pass the first number of the sequence and stop on the second number.
  3. Turn the dial to the right and stop on the third number of the sequence.
  4. Pull up on the shackle.

How do you reset a 4 digit combination lock if you forgot the code?

Take these steps to reset your lock:

  1. Pull up the shackle to open the lock.
  2. Rotate the shackle 90° counterclockwise and press all the way down.
  3. Hold down the shackle and set your own combination by turning dials.
  4. Turn the shackle back as normal. The setting is now complete.
You might be interested:  FAQ: How To Remove Bicycle Chain Link?

How do you unlock a 4 digit combination lock?

How to Open a Four Number Combination Lock

  1. Find your combination.
  2. Go to the first number.
  3. Set the second dial on the lock to the second number in the combination.
  4. Use the third wheel to find the third number in the combination.
  5. Locate the fourth number in the combination on the bottom wheel on the lock and center it.

How do you break a bike lock without a tool?

In order to do this, take a Bic pen, or a pen with a similar diameter, remove the tip of the pen, and then press the hollow pen tube into the keyway, press it in, and turn it in the unlocking direction. With a cheaper lock, this will usually be enough to open it.

How do you reset a 4 Combination Master Lock?

Decide on your new 4 letter combination – choose from suggestions or create your own. With dials at P-L-A-Y (middle of letters should be aligned with red stripe), pull out the shackle. Turn shackle 90 degree (1/4 turn) so notch on shackle is aligned with notch in lock body. Press and hold the shackle down.

Leave a Reply

Your email address will not be published. Required fields are marked *