- 1 What does a 3/32 chain mean?
- 2 How do I know what bike chain I need?
- 3 What size is a 9 speed chain?
- 4 What is the most common bike chain size?
- 5 What is the difference between bicycle chains?
- 6 How often should I change my bike chain?
- 7 How do I know my chain size?
- 8 Are 9 and 10 speed chains compatible?
- 9 Are all bicycle chains the same size?
- 10 What is a bicycle chain link?
- 11 How do I know what speed my bike is?
What does a 3/32 chain mean?
3/32″ chain is used on derailer equipped bicycles that have more than 3 speeds.
How do I know what bike chain I need?
Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.
What size is a 9 speed chain?
9 speeds. Chain width is about 6.7 mm. In a pinch, a 10 speed chain can be used. Still, narrower chain is more expensive, doesn’t last as long and will cause a bit slower shifting… but it will work.
What is the most common bike chain size?
Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.
What is the difference between bicycle chains?
Chains can vary in side plate shape, sizing, and height. Differences can cause variations in shifting performance between brands and models. Additionally, chains will vary in the quality of steel used. Better chains that are more durable and longer lasting tend to have harder rivets.
How often should I change my bike chain?
The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4
How do I know my chain size?
To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.
Are 9 and 10 speed chains compatible?
10-speed chains have the same inner/roller width as 9-speed chains while being narrower. Therefore, a 10-speed chain meets the compatibility requirements because it has enough inner space for a 9-speed sprocket and doesn’t cause rubbing due to its slimmer profile.
Are all bicycle chains the same size?
Are all bicycle chains the same size? No, all bicycle chains are not the same size. Size varies on the bike’s numbers of sprockets, speeds, the distance between the front chainring and rear cogs, and the number of teeth on them.
The master link is a single removable link segment of a bicycle chain. You’ll hear people also refer to these as quick links. Also, SRAM’s version of the master link is called a Power Link. It is sold separately as well as typically included when you buy a SRAM chain.
How do I know what speed my bike is?
Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike. If you have one front gear and three back gears, you have a 3-speed bike.