To find the master link on your chain, mount your bike in a bike work stand. If you don’t have a work stand, flip the bike over so it rests on its handlebars and saddle. Stand on the drivetrain side of your bike so you’re able to look straight down on the chain.
A chain is a serial assembly of connected pieces, called links, typically made of metal, with an overall character similar to that of a rope in that it is flexible and curved in compression but linear, rigid, and load-bearing in tension. A chain may consist of two or more links.
Bicycle chains are made of multiple pairs of steel outer plates and inner plates (or links) held together by rivets. A roller separates each pair of inner plates. The rivet (pin) is pressed tightly through both outer plates. The rivet then pivots freely on the inner plates and roller.
Yes the master link counts as the last link so that if you want a chain of 110 links then cut it so the chain without the master link has 109 links.
How do I know what speed my bike is?
Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike. If you have one front gear and three back gears, you have a 3-speed bike.
Chain Link Sizes: How to Measure Chain Link Sizes
- Pitch is measured by finding the distance from the center of one pin to the center of the next pin in line.
- Determine your side plate height and thickness by measuring both inside and outside the roller chain to ensure that you’re seeing a good average size.
In US customary units modern definition, the link is exactly 66⁄100 of a US survey foot, or exactly 7.92 inches or approximately 20.12 cm. The unit is based on Gunter’s chain, a metal chain 66 feet long with 100 links, that was formerly used in land surveying.
A master link or quick-release link is a roller chain accessory that allows convenient connection and disconnection of a chain without the need for a chain tool. It acts as a set of the chain’s outer plates, so joining two sets of the chain’s inner plate ends.