Readers ask: What Is The Difference Between A 415 And A 415h Bicycle Chain?

What is 415H chain?

415H roller chain is a non-standard series roller chain that is a common in stock item for USA Roller Chain. This 415H roller chain also is supplied with a high-quality lubricant for additional working life. We stock this chain in 10ft boxes, 50ft reels, 100ft reels, 250ft reels, and cut to length strands upon request.

What number is a 415 chain?

#415 chain is also known as #43, 083, and 1/2″ x 3/16″ chain. #415 chain has a 1/2″ center to center spacing between each pin, a 3/16″ spacing between inner links, and is approximately 7/16″ wide. Heavy-Duty #415 chain is best suited for motorized bicycles and tricycles, freight bicycles, and heavy-duty tricycles.

Is 415 chain the same as 41?

415 vs 41 chain The pitch and the roller diameter are the same. The 41 chain is 1/4 inch between the plates, the 415 is 3/16. This means if your sprocket is 3/16 inch thick either chain will work. If your sprocket is wider, or tapered as is the manic mechanic sprocket, only the 41 chain will work.

Will a 40 chain fit a 415 sprocket?

Member. Ok I figured out the chain size, a 40 chain will fit a 415 sprocket other than being a little wide.

You might be interested:  Readers ask: Why Does A Bicycle Chain Fall Off?

What is the difference between 415 and 420 chain?

#415 and #415H chain is also known as 1/2″x3/16″ chain. #420 chain is the exact same size as #41 chain however it has thicker pins which makes it stronger. #420 chain is used on motorcycles, mini bikes, go karts, and motorized tricycles.

What is the pitch of a 520 chain?

Dimensions: Chain Size: 520. Pitch (P): 0.625″ Roller Width (W): 0.250″

Is 41 chain the same as 410?

A 410 chain is a bicycle chain that’s slightly beefed up. The #41 chain works great, your not ever going to snap it. The big problem with a #41 chain is the width. They are fat can rub on wide rear tires and barley fit in the stock chain tensioner pulley.

How do I know my bike chain size?

Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.

Will a 428 chain fit a 420 sprocket?

You can probably use the 428 chain on the 420 sprockets. Not the other way around though. 428 sprockets are too thick for a 420 chain.

Will a #41 chain fit a #40 sprocket?

# 41 Chain will only fit #41 sprockets, #40 sprockets are too wide. #420 will fit on #41 sprockets, its just a little bit heavier duty with a larger pin. the 40 chain will fit on a 41 sprocket and the 41 chain will fit on a 40 sprocket but only if you shave the edges down a bit because a 40 sprocket is wider.

You might be interested:  Quick Answer: What Size Bicycle Chain?

Can I use a bike chain for a go kart?

Most go kart chains and mini bike chains have the chain size stamped directly on the chain links. #35, 40, 41, 420 and 50 chain are used on American Go Karts and Mini Bikes.

Leave a Reply

Your email address will not be published. Required fields are marked *