Readers ask: What Size Is A Standard Bicycle Chain?

How do I know my bike chain size?

Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. For example, you’d add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm.

How do I know my chain size?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.

What size is a 9 speed chain?

9 speeds. Chain width is about 6.7 mm. In a pinch, a 10 speed chain can be used. Still, narrower chain is more expensive, doesn’t last as long and will cause a bit slower shifting… but it will work.

Are all bicycle chains the same size?

Are all bicycle chains the same size? No, all bicycle chains are not the same size. Size varies on the bike’s numbers of sprockets, speeds, the distance between the front chainring and rear cogs, and the number of teeth on them.

You might be interested:  Often asked: What Size Bicycle Chain For Vintage Suntour 10 Speed?

What is the difference between.325 and 3/8 chain?

The three-eighths chain is a beefier saw and better suited to one that has more horsepower. It has larger teeth and a heavier duty chain, so it requires more horsepower to operate correctly. 325-inch chain for those saws between 40 and 60 cc.

How do I know my roller chain size?

Roller Chain Identification Most roller chain has the size stamped right into the side plates. You may see something like “40”, “C2080H” or “10B” stamped in, which the industry number that represents the chain size. Old chains will most likely need to be cleaned in order to see the size.

What is the most common bike chain size?

Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.

Are 9 and 10 speed chains the same?

The internal/roller width of 9 and 10- speed chains is the same – 2.18mm. The only difference is the spacing of the chainrings. 9 and 10-speed chainrings aren’t spaced the same way, but the differences aren’t humongous.

What is a bicycle chain link?

The master link is a single removable link segment of a bicycle chain. You’ll hear people also refer to these as quick links. Also, SRAM’s version of the master link is called a Power Link. It is sold separately as well as typically included when you buy a SRAM chain.

You might be interested:  Question: How To Remove Rust On Polish Bicycle Fork?

How often should I change my bike chain?

The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4

Leave a Reply

Your email address will not be published. Required fields are marked *