## Do all bicycles use the same chain?

No, all bicycle chains are not the same size. Size varies on the bike’s numbers of sprockets, speeds, the distance between the front chainring and rear cogs, and the number of teeth on them.

## How do I know what kind of bike chain I have?

Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.

## What type of chain is on a bicycle?

There are two basic types of bicycle chains: “one-speed” chains, and derailleur chains.

## How often should I change my bike chain?

The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4

## How do I know my bike chain size?

Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. For example, you’d add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm.

## What size bike chain do I need single speed?

1/8″ chains are used exclusively for single speed setups. In addition to the other answers, I found it helpful to read that the nominal width of a chain (1/8 or 3/32) actually refers to the width of the sprocket.

## How many links do I need in my bike chain?

Bicycle drive chain length A new bicycle chain usually comes with 116 links. This is long enough for the biggest chainrings and for most distances of rear wheel from front chainrings. So for optimal length a new chain is usually shortened from the 116 links that come in the box.

## Is it OK to use wd40 on bike chain?

All you need to do is rinse the bike chain to remove any mud and thick dirt. Spray the WD-40 Bike Degreaser onto the surface of your bike chain and give it adequate time to work. On top of that, the WD-40 Bike Degreaser can be used for the cleaning and degreasing of other moving parts as well.

## How much is a chain for a bicycle?

How much does a bike chain cost to replace? Entry level chains can start off around \$15.00 with more expensive and higher performance chains ranging from \$25.00 to \$60.00 or more. More expensive chains increase shift quality and are generally more durable as they wear.

You might be interested:  FAQ: How To Remove Bicycle Tube?

## How much does it cost to replace a chain on a bike?

Most bike shops will charge about \$30 – \$50 dollars depending on the bike shop, whether it’s a popular brand or a “mom & pop” shop. You may also want to take into consideration that the chain itself may cost \$30 – \$50 dollars but then the labor cost to replace this might run you an additional \$10 dollars.

## Are expensive bike chains worth it?

No. The only advantage of expensive chains within a specific brand is the minor reduction in weight. The ones with extra plating do look nicer and provide some corrosion resistance, but it takes almost no effort to keep your chain rust free.

## How long should a bike chain last?

Replacing your chain regularly can prolong the life of your drivetrain. Most mechanics agree that you should replace your chain about every 2,000 to 3,000 miles, depending on your riding style. Many Tour De France riders wear out two or even three chains on their primary bike over the course of the three-week race.

## Is Shimano chain better than KMC?

The difference between the Shimano chain and the KMC is marginal; your choice will always come to personal preference. Despite the inconvenience of adjusting the chain, the Shimano runs a lot smoother and will provide you with long-lasting use.