Readers ask: Where Can I Buy A Bicycle Chain Link Repair Tool?

What is a chain tool called?

A chain tool is a small mechanical device used to “break” a bicycle chain in such a way that it can be mended with the same tool. A bicycle chain has links and plates that are pinned together; these pins can be pushed out with the chain tool.

How much does a chain tool cost?

Most shops charge $15 to $20 to install a chain or you can purchase a chain tool for $10 to $50 and learn to do it yourself. Having a chain tool in your tool box is never a bad idea in any case.

What is the best bike chain tool?

Best workshop chain tools for 2021 according to our expert testers

  • Birzman Damselfly Universal chain tool: £40 / $24.
  • Topeak All Speeds chain tool: £28 / AU$50.
  • Lezyne Classic chain breaker: £45 / $50 / AU$75.
  • Pedro’s Apprentice chain tool: £55 / $72 / AU$110.
  • Park Tool CT-3.2 chain tool: £35 / AU$72.

Do you need a chain tool if you have a quick link?

One of the best technical developments recently has been that most chain companies are now providing special connecting links. They’ve become known as “quick links.” That’s because they can be connected by hand. That job – still necessary on chains without quick links – requires the right tool (a quality tool, too).

You might be interested:  Often asked: How To Find Master Link On Bicycle Chain?

How do you break a chain link without a tool?

In order to shorten the link without a chain tool, you need an alternative tool like a hammer, pliers or thin nail. They will assist you in pushing the pin easily. You can position the chain over a socket, and hit it with a hammer. Then, you can now pass the bolt all throughout the open holes.

How often should a bike chain be replaced?

To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. 4

How do I know my bike chain size?

Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.

Do I need a chain breaker?

The chain breaker mostly helps keep everything aligned properly, but you can do without it. I’ve used a hammer and improvised punch (nail), plus some vice grips without any problems to break and re-link a chain (some chains don’t come with master links).

What is a chain hook used for?

Chain hooks used for anchoring are primarily derived from hooks used widely in the lifting industry. Their most common use is to shorten chain when lifting.

How do I turn off quick link without the tool?

If you don’t have this tool, then there are two hacks. First is to use a combination grip or needle nose plier, place the jaws of the tool on opposing diagonal edges of the quick link and squeeze. This method will likely damage the quick link and so replacement is strongly recommended.

You might be interested:  How To Install Bicycle Chain Case?

Are Quick Links reusable?

The quick link is designed for use with 11-speed chains and is, according to Shimano, not reusable. Quick links are dead easy to install. Place the quick link into the chain gap, align and snap together – usually done by applying pressure through the cranks.

Leave a Reply

Your email address will not be published. Required fields are marked *