- 1 How do I know my bike chain size?
- 2 What size is a standard bicycle chain?
- 3 What number chain is on a bicycle?
- 4 Are all bicycle chains the same size?
- 5 How often should I change my bike chain?
- 6 Are 7 and 8 speed chains the same?
- 7 What is the most common bike chain size?
- 8 How strong is a bicycle chain?
- 9 Are 11 and 12 speed chains the same?
- 10 How do I know if my bike is 10 or 11 speed?
How do I know my bike chain size?
Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.
What size is a standard bicycle chain?
All modern bicycle chains are made to the “one-half inch pitch” standard, meaning from rivet to rivet is nominally 0.5 inches. The sprocket teeth are cut for this same one-half inch standard to accept bicycle chains. However, this does not mean all makes and models of chains are interchangeable.
What number chain is on a bicycle?
Bicycle Chains are generally categorized into two types: 1/2 × 1/8 and 1/2 × 3/32. The first number (1/2) is the chain pitch; the latter numbers (1/8 and 3/32, respectively) indicate the inner width in inches.
Are all bicycle chains the same size?
Are all bicycle chains the same size? No, all bicycle chains are not the same size. Size varies on the bike’s numbers of sprockets, speeds, the distance between the front chainring and rear cogs, and the number of teeth on them.
How often should I change my bike chain?
The 2,000-Mile Rule. To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same. 4
Are 7 and 8 speed chains the same?
Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm. That is why the reverse is not the case and a 7 speed chain and especially a 6 speed one will not work as well on an 8 speed system.
What is the most common bike chain size?
Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.
How strong is a bicycle chain?
Wippermann’s internal standard is 9,500-11,000 Newtons of breaking force for its bicycle chains, and they achieved that; some of the others fell short of that.
Are 11 and 12 speed chains the same?
12-speed chains can operate just fine with 11-speed cassettes. The main exception are Shimano’s new 12-speed HG+ models which are heavily optimized for downshifting and thus come with custom inner plates that don’t mix well with non-Shimano 12-speed components.
How do I know if my bike is 10 or 11 speed?
Multiply the front gear number by the rear gear number to get the number of speeds. For example, if you have two front gears and five back gears, you have a 10-speed bike.