Youtube Video On How To Purchase The Right Chain Length For Bicycle?

How do I know what size bike chain to buy?

Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.

How long should a bicycle chain be?

Using a ruler, a new chain should measure exactly 12 inches across 12 links, from middle of pin to middle of pin. The number most commonly agreed on for a worn chain is one percent elongation between links.

What size chain do most bicycles use?

The chain in use on modern bicycles has a 1⁄2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in “#40” indicates the pitch of the chain in eighths of an inch; and is standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.

How do I know if my chain is too long?

If the chain is really short, then you might not even be able to shift into the largest cog. Then, if you shift into the smallest chainring and smallest cog and if the rear derailleur pulls the chain back so far that it comes in contact with itself, the chain is too long.

You might be interested:  What Does A Sqeaky Sprocket Chain Mean On A Bicycle?

How do I set the size of a chain link?

Chain Link Sizes: How to Measure Chain Link Sizes

  1. Pitch is measured by finding the distance from the center of one pin to the center of the next pin in line.
  2. Determine your side plate height and thickness by measuring both inside and outside the roller chain to ensure that you’re seeing a good average size.

Do I need to shorten my bike chain?

Why Shorten a Bike Chain? All bikes come with a recommended bike chain length. It’s important to stick to this length if you want to ride comfortably and preserve the life of the rear derailleur. It’s the bike chain that does the work of getting the tires in rotation so that your bike can get in motion.

How can I tell if my bike chain is stretched?

Another ballpark method for checking chain wear is by measuring it with a ruler. Pick a rivet and line it up at the zero mark. Count 24 more rivets and your last rivet should be at the 12″ mark of your ruler. If it is off by more than 1/16″ your chain is stretched to the point of replacement.

How do I know my chain size?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.

You might be interested:  Quick Answer: How To Fix Bicycle Derailleur Chain Rub?

What is a good chain length for a man?

Most chain lengths chosen for men typically fall at the collar bone, which is usually around 20 inches in length. If the necklace includes a medallion, cross, or dog tag, a slightly longer length is suggested. Multiple chains of varying lengths may be worn for a layered look.

What is a chain stay?

What is the chainstay? The chainstay or “stays” = The pair of frame tubes that joins the bottom bracket shell to the rear axle holders (the slots the back wheel goes in). This means that the chain stays connect the bottom bracket (BB) to the center of the back wheel.

Does Cage length affect chain length?

In short, the wrong length derailleur cage will make determining proper chain length nearly impossible. Too much chain length and you’ll have shifting issues and suffer from dropped chains, but too little could rip your bike’s derailleur right off.

Leave a Reply

Your email address will not be published. Required fields are marked *